An electrician testing a breaker panel with a multimeter
Repair and troubleshooting

Electrical repair and troubleshooting

A breaker that keeps tripping. Lights that flicker. Half the house with no power. I trace it back to the cause and fix that, so it doesn’t come back next week.

Free 1-hour consultation

What I fix

Most calls start with “something stopped working.” Here’s what that usually turns out to be.

  • General electrical repairs

    Anything that stopped working, worked loose or never worked right.

  • Troubleshooting and diagnostics

    Testing circuit by circuit until the real cause shows up.

  • Breakers that keep tripping

    An overloaded circuit, a failing breaker or a fault in the wiring. I find out which.

  • Power outages and partial power loss

    Part of the house is dark and the breakers look fine.

  • Wiring repairs

    Damaged, loose or brittle wiring, repaired or replaced.

  • Outlet and switch repairs

    Dead outlets, crackling switches, a GFCI that won’t reset. Outlets and switches.

Half the house went dark?

Check these first.

If you smell burning, see scorch marks or hear buzzing, stop here and call me. If there’s smoke or flame, get out and call 911.

  1. Look at the panelA tripped breaker sits in the middle, not fully on or off. Push it all the way off, then back on.
  2. Find the GFCIKitchens, bathrooms, the garage and outside. One tripped GFCI can kill outlets in other rooms. Press reset.
  3. Check the neighborsIf their lights are out too, it’s the utility. Call them, not me.
  4. Still dark, or it trips again?Call or text me, any hour. Don’t keep resetting it.

Call me if…

  • A breaker trips again right after you reset it
  • Lights flicker or dim when something turns on
  • Outlets or switches stopped working
  • An outlet or switch plate feels warm

Good questions.

Why does my breaker keep tripping?

Usually one of three things: too much running on one circuit, a breaker that’s wearing out, or a fault somewhere in the wiring. The first is an easy fix. The other two need finding, and that’s the part I’m good at.

Do you take emergency calls?

Yes. I’m on call 24/7. The easiest hours to reach me are 5am to 9pm, but if something is unsafe, call any time.

Do you repair knob and tube wiring?

No, I replace it. Knob and tube has no ground wire, and after a hundred years it’s so brittle it can snap while I’m working on it, or a few days later. If it’s still live, I recommend replacing it, and I’ll lay out a plan to do that.

How much will it cost?

Every job is different, so I quote after I’ve seen it. The first hour on site is free, and you get the options and the price before any work starts.

Something stopped working?

The first hour on site is free. I look at it with you, explain what I see and give you your options before any work starts.

Get a free quote todayor call (978) 677-8496